Geneve Aluminum Outdoor Coffee Table
Details at a Glance
| Dimensions | 39.25 in. W x 39.25 in. D x 7 in. H |
|---|---|
| Weight | 43 lbs |
| Top Material | SVLK-certified Grade-A solid teak wood, slatted construction |
| Base Material | Powder-coated aluminum |
| Color | Brown teak with black aluminum legs |
| UV & Weather Resistance | Teak resists rot, fungus, and pests; aluminum resists rust and corrosion |
| Recyclable | 100% recyclable materials |
| Care | Develops natural silver-grey patina; use protective covers or store indoors during adverse weather |
This 39.25-inch square teak and aluminum coffee table drains water through slatted planks and stands on a rust-proof powder-coated frame designed for covered patios. The SUNPAN Geneve Aluminum Outdoor Coffee Table -- a 7-inch-tall low-profile piece in sustainably harvested Grade-A teak -- is available at LOOMLAN Outdoor with free shipping. Its black metal legs anchor deep outdoor seating arrangements while the natural wood resists rot and insects through its inherent oils.
Why Does Grade-A Teak Work Better Than Treated Pine or Cedar Outdoors?
Grade-A teak contains natural silica and rubber oils that repel moisture, fungus, and wood-boring insects without chemical treatments. Unlike pine or cedar, which absorb rain and crack, teak planks shed water and resist decay season after season. The SVLK certification confirms the wood was sustainably harvested, and its density -- heavier than most softwoods -- means it won't warp under summer heat or split in freeze-thaw cycles. The powder-coated aluminum base adds a second layer of durability: the baked-on finish seals the metal against rust and salt air far longer than painted or anodized frames, so the table holds up on coastal patios and high-humidity decks.
Does Teak Need Sealer, or Can You Let It Weather Naturally?
You can do either. If you want to keep the warm brown tone, apply a teak sealer every few months and clean the slats with a soft brush. If you prefer the silver-grey patina that develops under UV exposure, let the wood weather on its own -- the color change is cosmetic and doesn't compromise strength or water resistance. The open slats drain rain quickly, so moisture never pools, and the aluminum legs won't rust whether you seal the wood or not. During prolonged storms or winter, throw a cover over the table or move it under an eave; teak survives a freeze, but covers extend the time between cleanings and prevent algae buildup in the gaps.
Where Does a 39-Inch-Square Low-Profile Table Fit Best?
At 7 inches tall, this coffee table suits deep-seat lounge chairs and outdoor sectionals -- the low height keeps sightlines open and drinks within easy reach. Pair it with woven seating from the outdoor bistro tables collection for a layered desert-modern look, or flank it with smaller accent pieces from the outdoor console tables range to balance a wide patio. The 39.25-inch square footprint anchors a conversation zone without crowding walkways, and the black aluminum legs echo the frames on many powder-coated outdoor counter tables, tying your setup together. Because aluminum and teak are both lightweight relative to concrete or cast iron, you can shift the table between seating groups mid-season.
Frequently Asked Questions
- Will aluminum furniture rust if it stays outside year-round?
- Powder-coated aluminum resists rust and corrosion, so the Geneve's black legs hold up in covered outdoor areas through all four seasons. Protective covers during storms add extra longevity.
- Is a 43-pound table light enough to move but stable in wind?
- Yes -- one person can reposition it, but the combined weight of solid teak planks and an aluminum frame keeps it from tipping on breezy afternoons.
- Can this stay outside all year, or does it need to come indoors?
- It can stay out on a covered patio year-round. For open decks exposed to heavy snow or ice, bring it under an eave or use a fitted cover to prevent algae and reduce cleaning.
- Will the teak fade or crack in direct sun?
- Teak weathers to a silver-grey patina under UV exposure -- a natural, protective change that doesn't weaken the wood. It won't crack like pressure-treated lumber because its oils keep moisture out.
- How do I clean teak slats between the gaps?
- Use a soft-bristle brush and mild soap, rinse with a hose, and let the open slats drain. Avoid power washers; they can strip the wood's natural oils.
- Does this ship fully assembled, or is there a setup fee?
- Free curbside delivery is included to the continental USA. Assembly, in-room placement, and packaging removal are optional paid services available upon request for an additional fee.
We recommend a simple and effective cleaning and care regimen for our products.
Use a light application of mild soap and water with a spray bottle or dampened soft cloth to clean the surface of your piece.
Follow with a fresh dry towel to wipe away any excess moisture that remains.








